LC-Core APRS TrackDirect

My position About ☰

reset

KK4ZDZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4ZDZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1775411242	159 Pkts	141 Pkts	66 Pkts	53 C
1775407642	152 Pkts	136 Pkts	61 Pkts	53 C
1775404042	183 Pkts	145 Pkts	67 Pkts	52 C
1775400442	144 Pkts	125 Pkts	61 Pkts	52 C
1775396842	140 Pkts	128 Pkts	62 Pkts	52 C
1775393242	177 Pkts	163 Pkts	71 Pkts	52 C
1775389642	146 Pkts	132 Pkts	63 Pkts	52 C
1775386042	142 Pkts	123 Pkts	62 Pkts	53 C
1775382442	155 Pkts	138 Pkts	71 Pkts	53 C
1775378842	142 Pkts	131 Pkts	66 Pkts	53 C
1775375242	142 Pkts	132 Pkts	59 Pkts	54 C
1775371641	144 Pkts	131 Pkts	61 Pkts	52 C
1775368042	145 Pkts	135 Pkts	65 Pkts	53 C
1775364442	145 Pkts	132 Pkts	63 Pkts	53 C
1775360842	145 Pkts	136 Pkts	62 Pkts	54 C
1775357242	164 Pkts	153 Pkts	71 Pkts	54 C
1775353642	155 Pkts	135 Pkts	73 Pkts	54 C
1775350042	158 Pkts	152 Pkts	78 Pkts	53 C
1775346442	169 Pkts	160 Pkts	78 Pkts	53 C
1775342842	153 Pkts	144 Pkts	77 Pkts	54 C
1775339242	176 Pkts	167 Pkts	83 Pkts	54 C
1775335642	191 Pkts	180 Pkts	83 Pkts	54 C
1775332043	167 Pkts	157 Pkts	91 Pkts	54 C
1775328442	127 Pkts	120 Pkts	61 Pkts	54 C
1775324842	160 Pkts	154 Pkts	75 Pkts	55 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: