LC-Core APRS TrackDirect

My position About ☰

reset

KK4NTX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4NTX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1775393867	231 Pkts	231 Pkts	116 Pkts	37 C
1775390267	231 Pkts	230 Pkts	105 Pkts	37 C
1775386667	264 Pkts	261 Pkts	140 Pkts	37 C
1775383067	229 Pkts	227 Pkts	127 Pkts	37 C
1775379467	230 Pkts	228 Pkts	118 Pkts	37 C
1775375867	189 Pkts	186 Pkts	103 Pkts	37 C
1775372267	216 Pkts	212 Pkts	115 Pkts	38 C
1775368667	226 Pkts	222 Pkts	117 Pkts	38 C
1775365067	246 Pkts	244 Pkts	141 Pkts	39 C
1775361467	242 Pkts	241 Pkts	121 Pkts	39 C
1775357867	248 Pkts	247 Pkts	118 Pkts	39 C
1775354267	256 Pkts	254 Pkts	123 Pkts	39 C
1775350667	245 Pkts	241 Pkts	120 Pkts	39 C
1775347067	292 Pkts	290 Pkts	177 Pkts	39 C
1775343467	301 Pkts	299 Pkts	156 Pkts	39 C
1775339867	279 Pkts	275 Pkts	133 Pkts	39 C
1775336267	261 Pkts	258 Pkts	125 Pkts	38 C
1775332667	258 Pkts	257 Pkts	128 Pkts	38 C
1775329067	273 Pkts	272 Pkts	121 Pkts	38 C
1775325468	295 Pkts	291 Pkts	141 Pkts	38 C
1775321867	285 Pkts	284 Pkts	130 Pkts	37 C
1775318267	354 Pkts	350 Pkts	159 Pkts	37 C
1775314667	331 Pkts	328 Pkts	147 Pkts	37 C
1775311068	240 Pkts	238 Pkts	120 Pkts	37 C
1775307468	220 Pkts	218 Pkts	109 Pkts	37 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: