This is the latest recevied telemetry packets stored in our database for station/object SPRFLD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx1h* | Rx10m* | Dig1h* | Temp* | Vin* |
|---|---|---|---|---|---|
| 1775422305 | 550 Pkt | 97 Pkt | 0 Pck | 61.9 F | 13.69 Volt |
| 1775422005 | 570 Pkt | 88 Pkt | 0 Pck | 61.9 F | 13.76 Volt |
| 1775421705 | 560 Pkt | 51 Pkt | 0 Pck | 61.9 F | 13.69 Volt |
| 1775421405 | 590 Pkt | 74 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775421105 | 630 Pkt | 84 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775420805 | 670 Pkt | 75 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775420505 | 690 Pkt | 82 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775420205 | 740 Pkt | 86 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775419905 | 740 Pkt | 82 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775419605 | 760 Pkt | 101 Pkt | 0 Pck | 61 F | 13.76 Volt |
| 1775419305 | 770 Pkt | 118 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775419005 | 780 Pkt | 119 Pkt | 0 Pck | 61 F | 13.69 Volt |
| 1775418705 | 780 Pkt | 106 Pkt | 0 Pck | 60.1 F | 13.69 Volt |
| 1775418405 | 780 Pkt | 105 Pkt | 0 Pck | 60.1 F | 13.69 Volt |
| 1775418105 | 780 Pkt | 111 Pkt | 0 Pck | 60.1 F | 13.69 Volt |
| 1775417805 | 800 Pkt | 142 Pkt | 0 Pck | 60.1 F | 13.69 Volt |
| 1775417505 | 780 Pkt | 137 Pkt | 0 Pck | 60.1 F | 13.76 Volt |
| 1775417205 | 740 Pkt | 128 Pkt | 0 Pck | 60.1 F | 13.76 Volt |
| 1775416905 | 730 Pkt | 122 Pkt | 0 Pck | 60.1 F | 13.69 Volt |
| 1775416605 | 710 Pkt | 101 Pkt | 0 Pck | 60.1 F | 13.76 Volt |
| 1775416305 | 700 Pkt | 100 Pkt | 0 Pck | 60.1 F | 13.76 Volt |
| 1775416005 | 700 Pkt | 132 Pkt | 0 Pck | 60.1 F | 13.76 Volt |
| 1775415705 | 680 Pkt | 127 Pkt | 0 Pck | 60.1 F | 13.76 Volt |
| 1775415405 | 670 Pkt | 109 Pkt | 0 Pck | 60.1 F | 13.69 Volt |
| 1775415105 | 640 Pkt | 107 Pkt | 0 Pck | 60.1 F | 13.69 Volt |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Dig1h: 0, 10, 0
Temp: 0, 0.9, -83
Vin: 0, 0.07, 0.53
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)