This is the latest recevied telemetry packets stored in our database for station/object W4DMM-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 1775418656 | 0.18 Rx Erlang | 0.04 Tx Erlang | 164 count/10m | 117 count/10m | 39 count/10m |
| 1775417456 | 0.17 Rx Erlang | 0.05 Tx Erlang | 169 count/10m | 122 count/10m | 43 count/10m |
| 1775416256 | 0.16 Rx Erlang | 0.04 Tx Erlang | 152 count/10m | 104 count/10m | 37 count/10m |
| 1775415056 | 0.18 Rx Erlang | 0.04 Tx Erlang | 162 count/10m | 114 count/10m | 44 count/10m |
| 1775413856 | 0.17 Rx Erlang | 0.05 Tx Erlang | 167 count/10m | 120 count/10m | 49 count/10m |
| 1775412657 | 0.2 Rx Erlang | 0.05 Tx Erlang | 185 count/10m | 138 count/10m | 47 count/10m |
| 1775411457 | 0.19 Rx Erlang | 0.05 Tx Erlang | 176 count/10m | 128 count/10m | 46 count/10m |
| 1775410256 | 0.22 Rx Erlang | 0.06 Tx Erlang | 199 count/10m | 151 count/10m | 51 count/10m |
| 1775409057 | 0.22 Rx Erlang | 0.06 Tx Erlang | 197 count/10m | 149 count/10m | 53 count/10m |
| 1775407856 | 0.2 Rx Erlang | 0.06 Tx Erlang | 201 count/10m | 153 count/10m | 53 count/10m |
| 1775406656 | 0.2 Rx Erlang | 0.05 Tx Erlang | 196 count/10m | 148 count/10m | 47 count/10m |
| 1775405457 | 0.22 Rx Erlang | 0.05 Tx Erlang | 191 count/10m | 142 count/10m | 45 count/10m |
| 1775404256 | 0.21 Rx Erlang | 0.05 Tx Erlang | 206 count/10m | 158 count/10m | 52 count/10m |
| 1775403056 | 0.19 Rx Erlang | 0.05 Tx Erlang | 190 count/10m | 142 count/10m | 45 count/10m |
| 1775401856 | 0.22 Rx Erlang | 0.05 Tx Erlang | 222 count/10m | 174 count/10m | 46 count/10m |
| 1775400656 | 0.2 Rx Erlang | 0.05 Tx Erlang | 192 count/10m | 143 count/10m | 47 count/10m |
| 1775399456 | 0.19 Rx Erlang | 0.06 Tx Erlang | 170 count/10m | 123 count/10m | 50 count/10m |
| 1775398257 | 0.2 Rx Erlang | 0.05 Tx Erlang | 183 count/10m | 135 count/10m | 43 count/10m |
| 1775397061 | 0.18 Rx Erlang | 0.05 Tx Erlang | 177 count/10m | 130 count/10m | 46 count/10m |
| 1775395857 | 0.23 Rx Erlang | 0.06 Tx Erlang | 193 count/10m | 145 count/10m | 45 count/10m |
| 1775394657 | 0.19 Rx Erlang | 0.05 Tx Erlang | 167 count/10m | 120 count/10m | 49 count/10m |
| 1775393456 | 0.23 Rx Erlang | 0.06 Tx Erlang | 185 count/10m | 137 count/10m | 43 count/10m |
| 1775392257 | 0.21 Rx Erlang | 0.05 Tx Erlang | 204 count/10m | 156 count/10m | 50 count/10m |
| 1775391057 | 0.2 Rx Erlang | 0.06 Tx Erlang | 192 count/10m | 145 count/10m | 56 count/10m |
| 1775389857 | 0.21 Rx Erlang | 0.05 Tx Erlang | 193 count/10m | 145 count/10m | 45 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)