LC-Core APRS TrackDirect

My position About ☰

reset

METHOD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object METHOD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1775419570	13.98 Volt	570 Pkt	110 Pkt	87 Pcnt	740 Pkts
1775419570	13.98 Volt	570 Pkt	110 Pkt	87 Pcnt	740 Pkts
1775418970	13.98 Volt	580 Pkt	110 Pkt	88 Pcnt	760 Pkts
1775418970	13.98 Volt	580 Pkt	110 Pkt	88 Pcnt	760 Pkts
1775418370	13.98 Volt	590 Pkt	110 Pkt	88 Pcnt	890 Pkts
1775418370	13.98 Volt	590 Pkt	110 Pkt	88 Pcnt	890 Pkts
1775417770	13.98 Volt	590 Pkt	110 Pkt	88 Pcnt	930 Pkts
1775417770	13.98 Volt	590 Pkt	110 Pkt	88 Pcnt	930 Pkts
1775417170	13.98 Volt	570 Pkt	110 Pkt	88 Pcnt	970 Pkts
1775417170	13.98 Volt	570 Pkt	110 Pkt	88 Pcnt	970 Pkts
1775416570	13.98 Volt	580 Pkt	110 Pkt	89 Pcnt	1030 Pkts
1775416570	13.98 Volt	580 Pkt	110 Pkt	89 Pcnt	1030 Pkts
1775415971	13.67 Volt	560 Pkt	110 Pkt	88 Pcnt	830 Pkts
1775415970	13.67 Volt	560 Pkt	110 Pkt	88 Pcnt	830 Pkts
1775415370	13.98 Volt	550 Pkt	100 Pkt	90 Pcnt	890 Pkts
1775415370	13.98 Volt	550 Pkt	100 Pkt	90 Pcnt	890 Pkts
1775414770	13.98 Volt	540 Pkt	90 Pkt	89 Pcnt	780 Pkts
1775414770	13.98 Volt	540 Pkt	90 Pkt	89 Pcnt	780 Pkts
1775414170	13.98 Volt	540 Pkt	90 Pkt	89 Pcnt	820 Pkts
1775414170	13.98 Volt	540 Pkt	90 Pkt	89 Pcnt	820 Pkts
1775413571	13.98 Volt	540 Pkt	90 Pkt	90 Pcnt	1000 Pkts
1775413570	13.98 Volt	540 Pkt	90 Pkt	90 Pcnt	1000 Pkts
1775412971	13.98 Volt	520 Pkt	90 Pkt	89 Pcnt	870 Pkts
1775412970	13.98 Volt	520 Pkt	90 Pkt	89 Pcnt	870 Pkts
1775412370	13.98 Volt	520 Pkt	100 Pkt	90 Pcnt	760 Pkts

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: