LC-Core APRS TrackDirect

My position About ☰

reset

ND7L-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ND7L-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1775404933	106 Pkts	105 Pkts	15 Pkts	22 C
1775401332	116 Pkts	114 Pkts	18 Pkts	22 C
1775397732	104 Pkts	101 Pkts	11 Pkts	22 C
1775394132	89 Pkts	86 Pkts	7 Pkts	22 C
1775390532	91 Pkts	91 Pkts	9 Pkts	22 C
1775386932	98 Pkts	96 Pkts	7 Pkts	22 C
1775383332	111 Pkts	109 Pkts	9 Pkts	23 C
1775379732	101 Pkts	98 Pkts	8 Pkts	23 C
1775372526	106 Pkts	104 Pkts	12 Pkts	24 C
1775368926	110 Pkts	110 Pkts	10 Pkts	24 C
1775365326	122 Pkts	119 Pkts	10 Pkts	25 C
1775361728	139 Pkts	137 Pkts	18 Pkts	25 C
1775358126	109 Pkts	108 Pkts	17 Pkts	25 C
1775354526	52 Pkts	52 Pkts	1 Pkts	25 C
1775350926	58 Pkts	58 Pkts	11 Pkts	25 C
1775347326	52 Pkts	52 Pkts	17 Pkts	25 C
1775343726	57 Pkts	56 Pkts	13 Pkts	25 C
1775340126	67 Pkts	65 Pkts	9 Pkts	25 C
1775336526	128 Pkts	128 Pkts	25 Pkts	25 C
1775332926	136 Pkts	133 Pkts	23 Pkts	24 C
1775329326	180 Pkts	172 Pkts	39 Pkts	23 C
1775325727	153 Pkts	148 Pkts	32 Pkts	23 C
1775322127	145 Pkts	139 Pkts	28 Pkts	22 C
1775318526	141 Pkts	138 Pkts	28 Pkts	22 C
1775314927	143 Pkts	142 Pkts	31 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: