LC-Core APRS TrackDirect

My position About ☰

reset

NO2C-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NO2C-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	Temp*
1775367037	280 Pkts	261 Pkts	12 C
1775363411	227 Pkts	213 Pkts	12 C
1775359811	103 Pkts	98 Pkts	12 C
1775356211	108 Pkts	102 Pkts	13 C
1775352611	156 Pkts	147 Pkts	13 C
1775349011	150 Pkts	145 Pkts	14 C
1775345411	155 Pkts	148 Pkts	13 C
1775341811	187 Pkts	179 Pkts	13 C
1775338211	188 Pkts	177 Pkts	13 C
1775334611	303 Pkts	285 Pkts	13 C
1775331011	309 Pkts	293 Pkts	14 C
1775327411	329 Pkts	306 Pkts	14 C
1775323811	354 Pkts	334 Pkts	14 C
1775320211	364 Pkts	345 Pkts	13 C
1775316612	344 Pkts	320 Pkts	13 C
1775313012	223 Pkts	211 Pkts	13 C
1775309412	148 Pkts	142 Pkts	12 C
1775305811	184 Pkts	175 Pkts	12 C
1775302211	293 Pkts	272 Pkts	12 C
1775298611	310 Pkts	291 Pkts	12 C
1775295011	212 Pkts	189 Pkts	12 C
1775291411	185 Pkts	168 Pkts	12 C
1775287811	223 Pkts	206 Pkts	12 C
1775284211	183 Pkts	167 Pkts	12 C
1775280611	181 Pkts	161 Pkts	12 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: